KSW STUD WELDING MACHINE - SINGLE TORCH/ TWIN TORCH

SINGLE TORCH WELDER

Advantages:

  • Soft-switching inverter technology, small size, light weight, energy saving and environment friendly.

  • Modular Design, Full range of protection and use of pure IGBT devices, machine safety and reliability, low failure rate, no professionals required.

  • Waterproof board, anti-corrosive, moisture and dust resistantcan be used in field operations such as tunnels, high-rise buildings

  • Stepless welding current regulator, Displays the welding time, parameters and input voltage. Convenient and practical.

  • Fan-dormant, energy-saving and reduces dust. 3 times better life.

  • Voltage compensation occurs during lower voltage, where the device automatically stabilises the welding parameters, when ultra-low voltage occurs the welding equipment can still be normal as its forces are much higher than ordinary welding machine. The special characteristics apply to: Power shortage and when the equipment is used in multiple construction projects at the same time

  • Welding controls are available in manual and automatic at conversion, to adapt to a variety of welding technology. 

  • Welding parameters have been set up in panels in a comprehensive, real-feel equipment. 

  • A reasonable output voltage design, the use of welding torch cable can be extended. Sustained high load, high anti-fatigue. 

  • High-strength steel plate electrostatic spraying. The chassis is strong and corrosion resistant.

Technical Specifications

        Latest IGBT Technology .
        Only 1/3 weight of a Thyristor Type
        Modular design, easy and fast to provide after service.
  Wide voltage range
        30% Saving on Electricity
       

MODEL

DA-1000i

DA-1200i

DA-1600i

      

Stud range

Φ4mm-Φ12mm Φ4mm—Φ16mm Φ4mm—Φ20mm
      

Welding current

200A-1000A 200A—1200A 200A—1600A
      

Welding time

0.1S-3.0S 0.1S—3.0S 0.1S—3.0S
      

Welding speed

Φ12  10pcs/min Φ16  10pcs/min Φ20  10pcs/min
      

Input power

220V - 50/60Hz 3 Phase
380/400/440V 50/60Hz 3 Phase
220V - 50/60Hz 3 Phase
380/400/440V 50/60Hz 3 Phase
220V - 50/60Hz 3 Phase
380/400/440V 50/60Hz 3 Phase
      

Input capacity

35KW 40KW 50KW
      

Power switch

63A 63A 100A
      

Protection grade

IP21 IP21 IP21
      

Cooling Method

Fan Fan Fan
      

Size(L x W x H)

880mm×460mm×588mm 880mm×460mm×588mm 880mm×460mm×588mm
      

Weight

80+49kg 90+49kg 98+49kg

      

MODEL

DA-2000i

DA-2500i

DA-3150i

      

Stud range

Φ4mm—Φ24mm Φ4mm—Φ28mm Φ4mm—Φ36mm
      

Welding current

300A—2000A 300A—2500A 400A—3150A
      

Welding time

0.1S—3.0S 0.1S—3.0S 0.1S—3.0S
      

Welding speed

Φ24 10pcs/min Φ28 10pcs/min Φ36 8pcs/min
      

Input power

220V - 50/60Hz 3 Phase
380/400/440V 50/60Hz 3 Phase
220V - 50/60Hz 3 Phase
380/400/440V 50/60Hz 3 Phase
220V - 50/60Hz 3 Phase
380/400/440V 50/60Hz 3 Phase
      

Input capacity

60KW 80KW 110KW
      

Power switch

125A 160A 225A
      

Protection grade

IP21

IP21 IP21
      

Cooling Mehod

Fan Fan Fan
      

Size(L, W, H)

880mm×460mm×800mm 880mm×460mm×800mm 880mm×460mm×980mm
      

Weight

120+49kg 135+49kg 168+49kg

Dedicated to: steel, for floor boards, bridges, embedded parts, heavy machinery, industrial plants, high-rise buildings, power plant construction, chemical building, shipbuilding, metal structure, mechanical and electrical equipment.
≥ 3mm thickness of more than welding φ10mm, φ13mm, φ16mm, φ19mm, φ22mm, φ24mm peg , M4mm-M36mm stud, screws and nails similar to that bolt. Welding materials: carbon steel, low-alloy steel, stainless steel, copper and so on have to arc welding of materials. In the surface oxide layer, the film, primer or plating to deal with the welding work on the facilities. After the welding deformation is not no marks convex, flat welding, welding, welding Yang, the all-welding.